AICS 5 Rd Magazine 338LM Lapua Magnum 3.850 CIP Long Action Savage MDT

Description

112619 Drake Associates / Savage AICS 5 Rd. Magazine 338LM  - 3.850  Long Action.....New.
Has Savage baseplate since it was OEM magazine with Savage Stealth rifle but is a standard AICS magazine and will fit any applicable AICS rifle. Never loaded or inserted into rifle. MSRP is plus shipping.
**Will only fit a single feed bolt action rifle.**
Details:
5rd Single Stack Single Feed AICS 3.850 CIP .338LM  Magazine with Savage Arms Floorplate, Cerakote Finish - Standard issue on Savage Stealth and Stealth Evolution Rifles, Will work in AICS SSSF 3.850 CIP Compatible Rifles / Rifle Chassis
These magazines do include the custom floorplate with Savage Arms Logo
These can be used on the Stealth's Short and Long Action and the Stealth
Evolutions Short and Long Action
Other ideas on use
Any chassis that uses standard AICS Pattern SA magazine
Savage Stealth
Savage Stealth Evolution
Savage 10BA
Savage 110BA
Savage Elite Precision Rifle
Savage 110 FCP HS Precision Lapua
Accuracy International - chassis
Cadex Defense - chassis
The Remington MLR 338 rifle uses the AICS Pattern CIP Magazines
McMillan Firearms 338
The Savage 110 Long Range Hunter also uses the CIP Magazines. (338LM and
300WM  - Both CIP Magazines - shown below)
Savage, 110, Long Range Hunter, Bolt, Long Action, 338 Lapua, 26" Barrel,
Black Finish, Gray Synthetic Stock, Right Hand, 1 Mag, Muzzle Brake, 5Rd
Important Notes
Manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. We offer these magazines in .300 Winchester Magnum and .338 Lapua Magnum configurations and are compatible with AICS pattern DBM chassis and bottom metals.
* 3.850" 300 WM and 338 LM for CIP spec chassis and DBM
* 3.850" Outside Length: 3.760" max cartridge overall length (COAL)
* 338LM 4.050 magazine is not applicable for MDT Chassis Systems
* All MDT chassis are manufactured with a 3.715" magazine well, except the ESS which has a 3.850" mag well
* If you purchased a rifle direct from an OEM or retailer, please check the specifications
* Remington Tactical Chassis Rifle and 338 Lapua XCR rifles use a 3.775" magazine
* Will not work with 300 Remington Ultra Mag, 300 Weatherby, and similar cartridges
AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance.
MDT Metal Magazines - Long Action, are manufactured for .300WM, .338LM and 300 PRC calibers with a capacity of 5 rounds based on magnum rounds. The .300WM can also be used for 7mm, 30.06 and 6.5x55 calibers. In some cases the feed-lips may need to be bent. The maximum cartridge overall length that will fit in this 3.715 magazine is 3.615.
Important. Standard size magazines will not work with Tikka T3/T3x and Savage Axis long caliber actions. Our chassis systems for Tikka T3/T3x and Savage Axis have been manufactured to accept the custom 3.560 length magazine. With few exceptions, all our other chassis are sold with the 3.715 magazine well. (If you purchased a rifle with our chassis on it, please check with the manufacturer to find out which magazine length is used).
MDT Metal AICS magazines are manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. We offer these magazines in .300 Winchester Magnum and .338 Lapua Magnum, and 300 PRC configurations and are compatible with AICS pattern DBM chassis and bottom metals. The 300 Win Mag magazine can also be used for 7mm Rem Mag, 30.06, 6.5x55 and similar cartridges by adjusting the feed lips.
This magazine has a 5 round capacity based on magnum rounds.
MDT Metal Long Action Mags are manufactured in multiple lengths:
3.715" 300 WM and 338 LM for our chassis systems and other DBM
3.715" Outside Length: 3.625" max cartridge overall length (COAL)
3.560" 300WM for our chassis systems for Tikka T3/T3x and Savage Axis long action rifles (270 Win, 30-06, 300 WM etc)
3.560" Outside Length: 3.470" max cartridge overall length (COAL)
3.850" 300 WM and 338 LM and 300 PRC for CIP spec chassis and DBM
3.850" Outside Length: 3.760" max cartridge overall length (COAL)
IMPORTANT NOTES
338LM 4.050 magazine is not applicable for MDT Chassis Systems
The standard length long action magazine in an MDT Chassis is 3.715" unless otherwise noted in the description stating CIP or 3.85 for the longer magazine well
If you purchased a rifle direct from an OEM or retailer, please check the specifications
Remington Tactical Chassis Rifle and 338 Lapua XCR rifles use a 3.775" magazine not available from MDT
Tikka T3/T3x and Savage Axis long action calibers in our chassis you must use the 3.560" option
Will not work with 300 Remington Ultra Mag, 300 Weatherby, and similar cartridges
338 lapua magnum
Listing and template services provided by inkFrog